The correct way to use an electric circular saw

　　The correct way to use an electric circular saw

1. Install the circular saw blade

1. Turn off the power switch.

2. Tighten the nut on the cutterhead and remove the original blade.

3. Place the new blade flat on the cutterhead, making sure the blade surface is parallel to the cutterhead.

4. Gently turn the cutterhead to align the new blade with the cutterhead hole, and then tighten the nut.

5. Use a power tool to tighten the nut, the force should be even and the blade should not shake.

2. Operating an electric circular saw

1. Wear necessary safety equipment, such as gloves, goggles, etc.

2. Make sure the sawing machine is adjusted to a suitable height, no less than 3mm away from the cutting material.

3. Clamp the cutting material firmly on the saw machine with the cutting part slightly above the surface of the saw machine.

4. Press the power switch to make the saw start to rotate, and then slowly move toward the cutting material, keeping it steady and straight.

5. After cutting is completed, release the power switch and wait for the saw to stop rotating before removing the cutting material.