How to adjust the strength of an electric wrench to high or low?

How to adjust the strength of an electric wrench to high or low?

To adjust the torque of your electric wrench, follow these steps:

Determine the required torque value. Before adjusting, you need to know the torque value you need. This value can be obtained by referring to the instructions in the wrench or by experimental measurement.

Set the torque value. Electric wrenches usually have an adjustment ring through which the torque value is set. First, turn on the power and place the electric wrench where it needs to be used, then rotate the adjustment ring until the displayed torque value matches the required value.

Calibrate torque value. After setting the required torque value, calibration is required to ensure that the set value is accurate. Before calibration, the accumulator value should be set smaller than the indicated torque value. Then apply the wrench full force and adjust according to the maximum value that occurs until you reach the desired torque level.